This machine is mainly made of the actuating unit, mouth of tongs yield adopts open and close by up and down, and match with involutes circular arc slip with reverse self locking tooth group, drive by hydraulic pressure; The tractor host using the DC motor drive shaft gear reducer, gear meshing fixed axis in the chain, and linear motion, match the lower air pressure disc brake braking.
Main technical data

Host structure and working principle
1. Clamp device: Mouth of tongs yield adopts open and close by up and down, and match with involute circular arc alip with reverse self locking tooth group, drive by hydraulic cylinder, the power and control wire conveys by discharge wire.

2. Hydraulic horizontal movements type outlet break saw:
Diameter: 455mm
Motor power: 3KW  
Break saw rail travel: 3m
Draught machine and outlet break saw matching coordinate and accuracy.

3.3Rail: Adopts flange beam, the side is square steel and screw jointing.
4. Power device: Adopts DC machine drive and back on track linear motion by fixed chain.

5. Allocate electrify brake. (Brake automatic when the power cut).

1. Draught force(adjustment): 0~400kg
2. Draught speed(adjustment): Using extrusion profiles and tension synchronization
3. Draught display: Draught force display
4. Return speed(adjustment): 0~150m/min
5. Clamp feed dimension(max): Adjustment
6. Effective travel: Match with discharge table
7. Host motor power: DC electric machine using selected by extruding machine
8. Main control: PLC control
9. Host direction: By the buyer
10. Electric appliance: Adopts Schneider
11PLC: Adopts Mitsubishis or Siemens