Product List

(Total 70 Products )
Aluminum profile straightener
Material clamping mode: Open-close type/dowm pressing type
Control mode: Hydraulic motorized control
Travel: 1000mm-1200mm
Tensile force range: ...
Principle and function:
Since the die-casting furnace has been used for long time without being cleaned in time, a lot of clinkers are accumulated on melting furnace wall and ...
Principle:
By use of powder spraying machine, spraying deliming flux into aluminium melt bath with high purity nitrogen. The sprayed deliming flux will react with calcium in alloy ...
Burner of regenerative furnace
Main features:
1. Element content: 70%, 75%, 80%.
2. Extraction yield more than 90%.
3. Directly adding and easy use.

Purpose:
It is used to adjust content of manganese ...
Single Billet Hot Shear Furnace is the pre-process using by aluminum extrusion, and mainly used in heating billet, using gas spurt heating and hydraulic hot shear assemble. Its ...
Purpose:
Used for adding of boron element or grain thinning in aluminium alloy melting.

Main features:
1. This product will produce a number of ALB2 high melting point fine ...
  Homogenizing furnace is the special equipment which heat treated billet after casting and eliminate the residual stress as cast ingot and non-uniformity metallurgical ...
Foundry equipment technique:
1. Foundry equipment adopts densely hot top level foundry system, alignment dummy bar head by automatically, no stick silicate paper.
2. The ...
Functions:
1. It is lightly spread on end face of flat die cavity (without fluid guide hole) to make extruded solid profile separate automatically.
2. It is spread on end face ...
Main features:
1. This product contains lanthanum, cerium, praseodymium, neodymium and other combined rare earth elements, which can reduce crystal grain size, cleanse melt ...
Main features:
1. This product will produce a number of ZrAl3 high melting point fine grains dispersively distributed. While solidifying, they will act as external crystal ...
Purpose:
It is used for addition of copper element in aluminium alloy melting.

Main features:
This product is a kind of white block metal with low adding temperature and ...
Main features:
1. This product is Φ 9.5mm wire rolled with advanced equipment and wound into bundle with bright silvery white and clean appearance and neat and close ...
Side combustion aluminium bar heating furnace
Main features:
1.Element content:70%, 75%, 80%.
2.Extraction yield more than 90%.
3.Directly adding and easy use.

Purpose:
It is used to adjust content of copper element in ...
Main features:
1. This product is Φ9.5mm wire rolled with advanced equipment and wound into bundle with bright silvery white and clean appearance and neat and close ...
Casting windlass
Casting windlass

It is a hi-tech enterprise with famous universities and research institutes as its technological backing and is specialized in production of auxiliary materials ...
Main features:
1. High titanium content (40%Ti, 4%B), low consumption.
2. Extraordinary thinning result.
3. Easy use without need to weigh.

Thinning advantages:
1. It ...
Function: Aluminum and ingot heat preservation and refine
Form: Fixed rectangle and hydraulic pressure tilting
Working temperature of furnace
Aluminum liquid temperature from ...
The characteristic of burning system

1)The best pipeline disposal\intelligent zed controlled system and the expert technical workers′ debugging to ensure the steady saving ...
Foundry equipment technique:
1. Foundry equipment adopts densely hot top level foundry system, alignment dummy bar head by automatically, no stick silicate paper.
2. The ...
Main features:
1. Element content: 70%, 75%, 80%.
2. Extraction yield more than 90%.
3. Directly adding and easy use.

Purpose:
It is used to adjust content of iron ...
Die Oven is the equipment of being applied with Extrusion Press; It heated mould to the temperature near the billets and conveniently to extrusion molding.

The outside of the ...
Diameter of aluminum bar: 60 millimeter ~500 millimeter. Quantity of casting per time: 2 bars~120bars. There are different designs of casting crystallizer, for instance, water ...
Main features:
1. Element content: 55%, 75%, 80%.
2. Extraction yield more than 90%.
3. Directly adding and easy use.

Purpose:
It is used to adjust content of titanium ...
Regenerative aluminium melting furnace