Product List

(Total 70 Products )
Profile of 35T gas aluminum bar homogenizing oven

It is a hi-tech enterprise with famous universities and research institutes as its technological backing and is specialized in ...
LY-900 Recycling Separator for aluminum and ash

LY-900 Recycling Separator is a machine with advanced technique. Without any fuel, it can recycle the most aluminum ratio as ...
Main purpose:
Is used to dispose 700-degree aluminum dross and have it separated automatically.
Main parameters:
Thermal pot size: 0.25m³ (Φ900mm× Φ650mm) ...
Profile of 35T gas aluminum bar homogenizing oven

It is a hi-tech enterprise with famous universities and research institutes as its technological backing and is specialized in ...
  Homogenizing furnace is the special equipment which heat treated billet after casting and eliminate the residual stress as cast ingot and non-uniformity metallurgical ...
According to the different type molding, it can be handling 1~3PC 6 meter moldings four sides in 30 seconds one-time. It adopts international advanced matrix-pressure gas jet ...
Packing machine
Main purpose:
Is use to pack aluminum, plastic and cooper materials.
Main parameters:
Power: 3.75kw
Transmission means: By chain, with speed adjustable ...
Side combustion aluminium bar heating furnace
Profile of 35T gas aluminum bar homogenizing oven
The aluminum shape should be carried out aging treatment after extruding and forming, the purpose is to improve the intensity of the aluminum alloy shape and benefit to operation, ...
Billet heating furnace is a equipment which collects Heat engineering, Mechanical, Automatically control, Hydraulic and Photo electricity thermometric. It technical parameters and ...
Detailed Product Description


Flat section ingot die
Application:
Casting aluminum and aluminum alloy ingots
Casting method:
Hot top casting of ingots in dense arrangement ...
15T aluminum melting furnace and maintaining oven block
Equipments parameter:
It is suitable for extruding machine for heating mould
Applicable for 70- 300mm aluminum billeats mould
Heating mode: Electricity
Power: 18-240kw
Water ...
Melting furnace with sloping furnace door
Function: Aluminum and ingot heat preservation and refine
Form: Fixed rectangle and hydraulic pressure tilting
Working temperature of furnace
Aluminum liquid temperature from ...
The characteristic of burning system

1)The best pipeline disposal\intelligent zed controlled system and the expert technical workers′ debugging to ensure the steady saving ...
Square ingot die
Detailed Product Description
Square ingot die.
Specification:
Rectangular shape
Width(mm)-----1150~80
Thickness(mm)-----80~260
Length(mm)------6500~8000 ...
PLC, It must be guidance and traction for profile on the extrusion process, in order to reduce the bending distortion, improve product qualified. This machine adopts DC motor ...
Introduction
How top casting plant adopt wire ropes to lift the stage up and down.
In the process of casting. We use water to cool the billet.
Also, we make the path for ...
Main features and purpose:
1. This product will produce a number of ZrAl3 high melting point fine grains dispersively distributed. While solidifying, they will act as external ...
Die Oven is the equipment of being applied with Extrusion Press; It heated mould to the temperature near the billets and conveniently to extrusion molding.

The outside of the ...
Foshan TongRun Aluminum Equipment Co., Ltd is mainly producing Aging Oven, Melting Furnace, Homogenizing, Die Oven, Single Draught, Multiple Billets Hot Shearing Furnace, Discharge ...
Semi-continuous casting type. It′s designed that assign the aluminium fluid to the mould automatically. And the pulling type is chain pulling.
Technical Parameter
Capacity ≤ ...
Profile of 35T gas aluminum bar homogenizing oven

It is a hi-tech enterprise with famous universities and research institutes as its technological backing and is specialized in ...
Principle and function:
The de-cinder flux contains a lot of substance to greatly enhance superficial tension between aluminium and slag and a quantity of heating substance, which ...
Principle:
By use of powder spraying machine, spray powder refining flux into aluminium melt bath with high purity nitrogen. Under the combined effect of dispersed tiny nitrogen ...
the purpose of the device is to straighten the finished products after extruding;the pull force ranges 20-150T.pressing type clamp claw can effectively grasp the extruding parts ...