Inquiry Basket (
Offer List
De-Magnesium Flux (SX-MG)
Principle:
By use of powder spraying machine, spray de-magnesium flux into aluminium melt bath with high ...
[Expiration Date: 2010-05-28]
Aluminium Boron Intermediate Alloy (SX-AlB3)
Purpose:
Used for adding of boron element or grain thining in aluminium alloy melting.
Main features: ...
[Expiration Date: 2010-05-27]
Aluminium Rare Earth Intermediate Alloy (SX-AlRE10)
Main features:
1.This product contains lanthanum, cerium,praseodymium, neodymium and other combined rare ...
[Expiration Date: 2010-05-27]
Aluminium Titanium Intermediate Alloy (SX-ALTI6)
Main features and purpose:
1. This product will produce a number of ZrAl3 high melting point fine grains ...
[Expiration Date: 2010-05-27]
Aluminium Copper Intermediate Alloy (SX-AlCu50)
Purpose:
It is used for addition of copper element in aluminium alloy melting.
Main features:
This ...
[Expiration Date: 2010-05-28]
Titanium Boron Thinning Additive (SX-TI)
Main features:
1. High titanium content (40%Ti, 4%B), low comsumption.
2. Extraordinary thinning ...
[Expiration Date: 2010-06-29]
Covering Flux (SX-F1)
Performance features:
It can form a layer of dense film on the surface of aluminium liquid to reduce ...
[Expiration Date: 2010-05-28]
Aluminium Titanium Boron Bar
Main features:
1. This product is ¦µ9.5mm wire rolled with advanced equipment and wound into bundle with ...
[Expiration Date: 2010-05-28]
Chrome Additive (SX-Cr)
Main features:
1.Element content: 70%, 75%, 80%.
2.Extraction yield more than 90%.
3.Directly adding and ...
[Expiration Date: 2010-05-28]
Titanium Additive (SX-Ti)
Main features:
1. Element content: 55%, 75%, 80%.
2. Extration yield more than 90%.
3. Directly ...
[Expiration Date: 2010-05-27]
Manganese Additive (SX-MN)
Main features:
1. Element content: 70%, 75%, 80%.
2. Extraction yield more than 90%.
3. Directively ...
[Expiration Date: 2010-05-28]
Aluminium Titanium Boron Wire
Main features:
1. This product is ¦µ9.5mm wire rolled with advanced equipment and wound into bundle with ...
[Expiration Date: 2010-05-28]
Aluminium Zirconium Intermediate Alloy (SX-ALZR10)
Main features:
1. This product will produce a number of ZrAl3 high melting point fine grains dispersively ...
[Expiration Date: 2010-05-28]
Ca Deliming Flux (SX-CA)
Principle:
By use of powder spraying machine, spraying deliming flux into aluminium melt bath with high ...
[Expiration Date: 2010-05-27]
Refining Flux (SX-J1)
Principle:
By use of powder spraying machine, spray powder refining flux into aluminium melt bath with ...
[Expiration Date: 2010-05-28]
